|
Waterbased Epoxy Floor Paint (available in 1 litre, 2.5 litres and 5
litres)
A two part pigmented paint for use over fresh concrete surfaces.
Waterbased Epoxy Floor Paint Primer (available in 1 litre, 2.5
litres and 5 litres)
Primer for use with waterbased epoxy floor paint.
Epoxy Modified Cementious Floor Screed (available in 10 kg and 25
kg)
A three part system ideal for use over damp or old concrete.
Epoxy Modified Cementious Floor Screed Primer (available in 1 litre,
2.5 litres and 5 litres)
Primer for use with epoxy modified cementious floor screed.
Epoxy
Self Levelling Floor Screed (available in 5 kg, 10kg or 25 kg)
A self levelling screed for use in areas where optimum chemical
resistance combined with a decorative effect is required.
Epoxy
Self Levelling Floor Screed Primer (available in 1 litre, 2.5 litres
and 5 litres)
Primer for use with epoxy self levelling floor screed.
Epoxy
Flooring Mortar (available in 10 kg and 25 kg)
A three part Epoxy Resin Based material providing a thin floor coating
of high strength to be used where normal concrete may not prove
adequate.
Epoxy Solvent Free Coating (available in 5 kg)
A high quality high build two component solvent free epoxy coating for
application to new and existing concrete floors. It provides a smooth,
easily cleaned surface which is resistant to dirt, moisture, oil,
light-medium abrasion and chemical attack.
Epoxy Self Levelling Floor Compound (available in 10 kg and 25 kg)
Typically for areas where optimum chemical resistance combined with
decorative effect is required.
Floor Levelling Compound - Cementitious (available in 25 kg)
A pre-mixed, cement based, self levelling compound designed to give a
smooth floor finish suitable to receive final floor coverings.
Industrial Floor Paint (available in 5 litres)
A single pack floor sealer, based on a moisture curing Polyisocyanate
prepolymer.
Industrial Floor Sealer (available in 5 litres)
A low viscosity, one part, moisture cured Urethane which when cured
produces a remarkably tough flexible film capable of withstanding
abrasion, chemical attack, oil, grease and water penetration.
Non
Slip Aggregates
available in three grades - fine, medium and course - the choice of
grade is determined by the use for the finished surface.
Solvent Free Chemically Resistant Coating (available in 1 litre, 2.5
litres and 5 litres)
A two part solvent free system coating which has the ability to resist a
variety of chemicals and therefore has a wide variety of applications
where other coatings may fail.
|