Fungicidal Wall Solution

Technical Data Sheet

1.  DESCRIPTION

Antel Fungicidal Wall Solution water dilutable concentrate is one of the range of treatments specially formulated for the remedial industry, to provide a material for the effective treatment of fungal attack on masonry.

2.  USES

Designed especially for the treatment of masonry, walls and roof tiles for the effective removal of fungicide and moss growth (on roofs).

3.   PACKAGING       

Available in 1 litre size.

15 x 1 litre plastic containers per box.

4.   USAGE RATE

1 litre of diluted fluid will treat approximately 2 - 3 square metres depending on porosity and surface conditions.

5.   STORAGE

Store in secure, cool, dry, well ventilated conditions in original closed containers. Keep out of reach of children.

Protect from freezing.

6.   HEALTH & SAFETY       

If inhaled remove to fresh air immediately.  Irritating to eyes and skin.  Precautions are necessary in handling and application, to avoid bodily contact due to splashing, spillage or leakage.  The normal precautions (use of goggles/visor, gloves, protective clothing and the prompt removal of contaminated clothing) should be observed with particular rigour especially when Fungicidal Wall Solution is in its concentrate form.

Should the fluid come into contact with the skin it must be washed off promptly.

If in contact with the eyes, flush copiously with water and seek medical attention.

7.   DILUTION    

1 PART CONCENTRATE : 24 PARTS WATER

(1 litre of Fungicidal Wall Solution makes up to 25 litres)

8.   MIXING

Mix the contents of the concentrate Fungicidal Wall Solution with water in a 25 litre container.  Close the cap tightly and shake to thoroughly mix the solution.   The emulsion is easily formed and stable for a complete working day. Mix only enough material as will be used for 2 - 3 days after initial mixing. (It is preferable to only mix sufficient on a daily basis).

9. APPLICATION

Apply Fungicidal Wall Solution by brush or by spray to the affected areas.  For the effective removal of fungicide and moss growth on roofs, apply to the affected areas and allow to remain in contact for a period in excess of one hour but not more than three hours.  Power wash the treated areas to remove the neutralised material.  Apply a further coat of the solution and allow to dry.