Low Viscosity Grout

Technical Data Sheet

1. DESCRIPTION 

Antel Epoxy Low Viscosity Grout is a very low viscosity material used for sealing very fine cracks in concrete.

It has superb penetration into fine cracks and as in our Epoxy Grout has the ability to chase away water and penetrate damp concrete.

2.  PACKAGING           

Supplied in two pack sets sufficient to provide either 500 ml or 1 litre of mixed material.

3.  STRENGTH

The adhesive, compressive and tensile strengths far exceed the strength of concrete.

4.  SHELF LIFE

12 months in sealed containers

5.  PREPARATION

Epoxy Low Viscosity Grout should be applied to surfaces that are clean and free of any loose or flaking material. 

Free water should be removed from the surface but there is no need for the surface to be dry.

6.  MIXING

Epoxy  Low Viscosity Grout  is supplied as a two-pack material comprising of two liquid packs marked A and B. 

The contents of Pack B should be emptied into the container marked A and the mixture stirred until mixing is complete.

7.  APPLICATION

The usual method of application is by surface saturation which should continue until the Grout ceases to penetrate.

8.  CURING

Pot Life - 90-120 minutes at 20°C

Hard Cure within 24-36 hours at 20°C

Full Cure - 7 days at 20°C

9.  TOOL CLEANING

Immediately after use, all brushes, tools and equipment should be cleaned using Antel Cleaning Solvent.