Waterproof Tile Grout

Technical Data Sheet

1.  DESCRIPTION

Antel Waterproof Tile Grout is a cement based grout suitable for grouting ceramic tiles, mosaics and similar wall and floor finishes, in both interior and exterior situations.

Antel Waterproof Tile Grout can be safely used in wet areas such as showers.

2.  PACKAGING                    

3 kgs and 15 kgs

3.  COVERAGE                     

1 kg will grout approximately 4 m² depending on the width and depth of the joint.

4.  STORAGE                        

Store in cool dry conditions in original packaging.  Protect from freezing.  Keep out of reach of children.

5.  HEALTH AND SAFETY

Antel Waterproof Tile Grout contains cement.

Care should be taken to avoid inhalation or ingestion of the product.

When mixed with water alkali is released and skin irritation or burning can result from prolonged contact.  This should be avoided by the use of gloves etc. and splashes washed off with water.

If in contact with the eyes flush copiously with water and seek medical attention.

6.  APPLICATION

Do not grout for 24 hours after tiling

Mix the Waterproof Tile Grout with water to a thick creamy consistency and allow to stand for 5 minutes. 

Re-mix and use within 4 hours.

Using a sponge or squeegee, work the grout thoroughly into the tile joints.

Remove the excess Grout from the face of tiles. 

Use a rounded piece of wood to compact the grout into the joint.

Allow to dry and then clean the cloth with a soft cloth