Epoxy Modified Cementitious Floor Screed Primer

Technical Data Sheet

1. DESCRIPTION

Antel Water based Mortar Primer has been especially developed to be used in conjunction with Antel Epoxy Modified Cementitious Floor Screed for the sealing of application areas prior to applying the finished coat.

2. USES

Primer/sealer.

3. PACKAGING

1 litre, 2.5 litre, 5 litre cans.

4. COLOUR

Clear.

5. USAGE RATE

2.5 litres will cover 15 - 20 m² depending on substrate and absorption.

6. SHELF LIFE

12 months in sealed container.

7. INSTRUCTIONS FOR USE.

7.1 Preparation

Surfaces should be dry and free from all foreign matter such as dust, grease etc. Weak or loose material must be removed. Best results are obtained by the use of the appropriate Antel cleaner.

7.2 Mixing:

Mix the entire contents of pack 'B' with pack 'A'. Add water to adjust to desired viscosity and agitate for 3 minutes.

7.3 Application.

Apply by brush or roller to the prepared surface.

7.4 Curing

Pot life @ 20°C 1.5 hours
Tack free @ 20°C 5 hours
Through cure @ 20°C 10 hours

7.5 Cleaning Tools:

Clean tools immediately after use with clean water.

8. TYPICAL PERFORMANCE DATA

Employed as a primer - no specific data required.