|
Timber Preservative /
Repellent
Technical Data Sheet
1.
DESCRIPTION
Antel
Timber Preservative/Repellent is specially formulated for the
remedial industry. It
has a dual acting system, a deep acting timber preservative
together with an extremely effective fungicide which activates
itself in the presence of moisture.
This
product is approved under the 'Control of Pesticides Regulations
1986' - HSE 4848.
Contains
Tri Hexylene Glycol Biborate 4.3% w/w
2.
USES
As
a pre treatment for timber. Its
repellent qualities protect against moisture ingress whilst in
transit or when finished joinery is being stored on site prior to
installation.
3.
PACKAGING
5
litre, 25 litre or 200 litre non returnable containers.
4.
USAGE RATE
Dipping
-
As required
Brush
-
1 litre will cover 7 mē (depending on absorption)
Spray
-
1 litre will cover 4-5 mē (depending on absorption)
5.
HANDLING & STORAGE
Handling:
Avoid contact with the eyes and skin.
Use PVC
gloves, goggles, respirator, protective
overalls
and footwear.
Storage:
Store in cool dry conditions in original
containers away from sunlight.
Protect from freezing.
Keep out of reach of children.
Shelf
Life: 12 months
6.
MIXING
Shake
contents thoroughly before use.
7.
APPLICATION
Application
may be by brush or spray.
Immersion
in a 'dip tank' should be for approximately
3 - 5 minutes.
For
coloured solutions Antel Basecoat is recommended.
Surfaces
to be treated should be reasonably dry.
Any paint, varnish or other surface coating should be
removed. Although
Antel Timber Preservative/Repellent contains solvent it has
virtually no odour once the solvent carrier has evaporated, which
is approximately 36 - 48 hours at standard temperature and
pressure.
|
