|
Epoxy Grout Thixotropic
Technical Data Sheet
1.
DESCRIPTION
Antel
Epoxy Grout Thixotropic is
a two pack liquid epoxy resin with an added thixotropic agent,
ideally suited for vertical and overhead priming and for bonding
concrete together, gap filling etc.
2.
USES
1.
Gap filling adhesive
2.
Concrete bonding
3.
Patch repair
4.
Priming in vertical and overhead areas
3.
PACKAGING
500
ml and 1 litre.
4.
USAGE RATE
1
litre will fill a void 20 mm x 100 mm x 80 mm
5.
INSTRUCTIONS FOR USE.
5.1
Preparation:
All
surfaces should be clean and free from all loose material.
Free water should be removed from the surface but the
surface does not need to be dry.
5.2
Mixing:
Mix
the entire contents of pack 'B' with pack 'A' stirring for three
minutes until uniform.
5.3
Application:
For
bonding of concrete, apply Antel Thixotropic Grout to the surfaces
and bring the surfaces together under slight pressure.
For
cracks or holes etc. the mixed material can be placed in an Antel
Cartridge complete and loaded into an ordinary silicone gun from
which it can be dispensed.
5.4
Cure schedule:
Pot
life
@ 20°C
45 minutes
Initial
cure
@ 20°C
48 hours
Full
cure
@ 25°C
4-7 days dependent on temperature.
6.
CURE PROPERTIES
Compressive
strength: 750
N/mm²
Tensile
strength:
7 days/20°C -12N/mm²
Tensile
bond-steel:
7 days/20°C - 10N/mm²
7.
SHELF LIFE
12
months in original containers.
8.
TOOL CLEANING
All
tools etc should be cleaned with Antel Cleaning Solvent
immediately after use.
|
